课程主题
Troubleshooting
完全覆盖A structured method for isolating a fault, and reading the shape of a problem from the symptoms it produces.
- lesson
- 6 lessons
- quiz
- 10 quizzes
- question
- 20 questions
- lab
- 24 labs
已教授、已评估,并已在实验中练习。
为什么这很重要
Network+ weights troubleshooting more heavily than any other domain, and it is the one skill that does not transfer from reading alone - it needs a broken network to practise on.
延伸阅读
技术指南
学习
涵盖此主题的模块
6 lessons 门与此主题相关的课程,按顺序编排于这些模块中,并配有相应的测验与实验。
- Diagnosis in practiceNetwork operations and design
- Direction and stateNetwork security and acls
- Filtering by addressNetwork security and acls
- Dhcp in operationNetwork services
- Services assessmentNetwork services
- Network basicsNetworking fundamentals
- Network servicesNetworking fundamentals
- Switching and vlansNetworking fundamentals
- BgpRouting protocols
- Choosing a pathRouting protocols
- EigrpRouting protocols
- Knowing what is plugged inRouting protocols
- Ospf areas and faultsRouting protocols
- Static routing faultsRouting protocols
- When the link is the problemRouting protocols
练习
实操实验
真实的虚拟网络,配有设备控制台,自动评分。每次尝试都会重新生成地址方案。
- Egress Filter on the Records Server
- The Firewall That Never Saw the Request
- Traffic Leaves by the Backup Circuit
- eBGP Session Up, No Routes
- Slow, Not Broken
- DHCP Scope Eats the Server Block
- DHCP Hands Out the Wrong Gateway
- EIGRP - Fix R2 (3-Router Chain)
- Static Route Outranks OSPF
- iBGP Route Learned but Never Installed
- The Accounting VLAN Went Quiet After a Cable Audit
- The Patch Panel Labels Are Wrong
- Small Packets Fine, Large Packets Gone
- OSPF Area Mismatch on a New Link
- OSPF Stuck in ExStart
- The Protocol That Loses Your Subnet Masks
- Shared-Segment Wrong Next-Hop
- Overbroad Summary Route Blackhole
- One Server, Wrong Exit Interface
- The Route That Isn't There
- Tagged Port, Untagged Host
- Trunk Missing a VLAN
- Access Port in the Wrong VLAN
- Allow Access to Wiki Replica
检验
评分测验
20 graded questions 道题目,分布在 10 quizzes 个测验中,在上方模块内进行。答错时会解释你所选选项背后的具体误区。
复习
间隔重复
Troubleshooting 已纳入复习阶梯追踪。你回答过一道相关题目后,它会按照逐渐拉长的间隔重新出现,只要你持续答对;如果答错则会重置。查看你的复习队列。
认证
此主题覆盖的考试目标
Cisco CCNA 200-301 v1.1
- 2.1 配置并验证跨多台交换机的 VLAN(普通范围)
- 2.2 配置并验证交换机间连接(中继、802.1Q、本征 VLAN)
- 2.3 配置并验证第 2 层发现协议(CDP、LLDP)
- 3.1 解读路由表的组成部分
- 3.2 判断路由器默认如何做出转发决策
- 3.4 配置并验证单区域 OSPFv2
- 4.1 配置并验证使用静态方式与地址池的内部源 NAT
- 4.3 解释 DHCP 与 DNS 在网络中的作用
- 4.4 解释 SNMP 在网络运维中的作用
- 4.5 描述 syslog 功能的使用,包括设施与级别
- 4.6 配置并验证 DHCP 客户端与中继
- 4.9 描述 TFTP/FTP 在网络中的能力与作用
CompTIA Network+ N10-009
- 1.1 解释与 OSI 参考模型相关的概念
- 2.1 解释路由技术的特征
- 2.2 结合场景配置交换技术与特性
- 3.1 解释组织流程与制度的目的
- 3.3 解释灾难恢复概念
- 3.4 结合场景实施 IPv4 与 IPv6 网络服务
- 5.1 解释故障排查方法论
- 5.3 结合场景排查网络服务的常见问题
- 5.4 结合场景排查常见的性能问题
- 5.5 结合场景排查并解决一般性网络问题
