カリキュラムのトピック
Troubleshooting
完全A structured method for isolating a fault, and reading the shape of a problem from the symptoms it produces.
- lesson
- 6 lessons
- quiz
- 10 quizzes
- question
- 20 questions
- lab
- 24 labs
教えて、評価して、ラボで練習します。
重要な理由
Network+ weights troubleshooting more heavily than any other domain, and it is the one skill that does not transfer from reading alone - it needs a broken network to practise on.
さらに詳しく
技術ガイド
学ぶ
このトピックを扱うモジュール
このトピックに関する6 lessonsが、クイズやラボとともにこれらのモジュール内に順序立てて配置されています。
- Diagnosis in practiceNetwork operations and design
- Direction and stateNetwork security and acls
- Filtering by addressNetwork security and acls
- Dhcp in operationNetwork services
- Services assessmentNetwork services
- Network basicsNetworking fundamentals
- Network servicesNetworking fundamentals
- Switching and vlansNetworking fundamentals
- BgpRouting protocols
- Choosing a pathRouting protocols
- EigrpRouting protocols
- Knowing what is plugged inRouting protocols
- Ospf areas and faultsRouting protocols
- Static routing faultsRouting protocols
- When the link is the problemRouting protocols
練習する
実践ラボ
デバイスコンソールを備えたリアルな仮想ネットワークで、自動採点されます。アドレッシングは試行のたびに再生成されます。
- Egress Filter on the Records Server
- The Firewall That Never Saw the Request
- Traffic Leaves by the Backup Circuit
- eBGP Session Up, No Routes
- Slow, Not Broken
- DHCP Scope Eats the Server Block
- DHCP Hands Out the Wrong Gateway
- EIGRP - Fix R2 (3-Router Chain)
- Static Route Outranks OSPF
- iBGP Route Learned but Never Installed
- The Accounting VLAN Went Quiet After a Cable Audit
- The Patch Panel Labels Are Wrong
- Small Packets Fine, Large Packets Gone
- OSPF Area Mismatch on a New Link
- OSPF Stuck in ExStart
- The Protocol That Loses Your Subnet Masks
- Shared-Segment Wrong Next-Hop
- Overbroad Summary Route Blackhole
- One Server, Wrong Exit Interface
- The Route That Isn't There
- Tagged Port, Untagged Host
- Trunk Missing a VLAN
- Access Port in the Wrong VLAN
- Allow Access to Wiki Replica
確認する
採点付きクイズ
10 quizzesにわたる20 graded questionsを、上記のモジュール内で受験します。誤答には、選んだ選択肢の背後にある具体的な誤解が説明されます。
復習
間隔反復
Troubleshootingは復習ラダーで追跡されます。一度その問題に回答すると、正解し続ける限りスケジュールが伸びながら再登場し、間違えるとリセットされます。復習キューを見る。
資格試験
このトピックがカバーする出題範囲
Cisco CCNA 200-301 v1.1
- 2.1 複数のスイッチにまたがるVLAN(通常範囲)を設定し検証する
- 2.2 スイッチ間接続(トランク、802.1Q、ネイティブVLAN)を設定し検証する
- 2.3 レイヤー2ディスカバリプロトコル(CDP、LLDP)を設定し検証する
- 3.1 ルーティングテーブルの構成要素を解釈する
- 3.2 ルーターがデフォルトでどのようにフォワーディングの判断を行うかを判定する
- 3.4 シングルエリアOSPFv2を設定し検証する
- 4.1 スタティックとプールを使用した内部ソースNATを設定し検証する
- 4.3 ネットワーク内でのDHCPとDNSの役割を説明する
- 4.4 ネットワーク運用におけるSNMPの機能を説明する
- 4.5 ファシリティとレベルを含むsyslog機能の使用方法を説明する
- 4.6 DHCPクライアントとリレーを設定し検証する
- 4.9 ネットワークにおけるTFTP/FTPの機能と役割を説明する
CompTIA Network+ N10-009
- 1.1 OSI参照モデルに関連する概念を説明する
- 2.1 ルーティング技術の特徴を説明する
- 2.2 シナリオに基づき、スイッチング技術と機能を設定する
- 3.1 組織的なプロセスと手順の目的を説明する
- 3.3 ディザスタリカバリの概念を説明する
- 3.4 シナリオに基づき、IPv4とIPv6のネットワークサービスを実装する
- 5.1 トラブルシューティングの手法を説明する
- 5.3 シナリオに基づき、ネットワークサービスのよくある問題をトラブルシューティングする
- 5.4 シナリオに基づき、よくあるパフォーマンスの問題をトラブルシューティングする
- 5.5 シナリオに基づき、一般的なネットワークの問題をトラブルシューティングして解決する
